Select Page

Symantec AV

Welcome Forums Integrations Symantec AV

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #1657
    Mike RiforgiateMike Riforgiate
    Keymaster

    To export log data to a Syslog server

    1. In the console, click Admin.

    2. Click Servers.

    3. Click the local site or remote site that you want to export log data from.

    4. Click Configure External Logging.

    5. On the General tab, in the Update Frequency list box, select how often to send the log data to the file.

    6. In the Master Logging Server list box, select the management server to send the logs to.

    7. Check Enable Transmission of Logs to a Syslog Server.

    8. Provide the following information:

      • Syslog Server

        Type the IP address of WitFoo appliance

      • Destination Port

        Use 514/tcp

      • Log Facility

        Use 0

    9. On the Log Filter tab, check which logs to export.

    10. Click OK.

    11. Flip back over to the WitFoo “Search” interface and search for the IP address of the McAfee ePO server. An entry should be listed on the Syslog tab.

      Reference: https://support.symantec.com/en_US/article.HOWTO81169.html

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.